Dr. Mark Brinker, Houston Orthopedic Surgeon Article RSS http://drbrinker.com Dr. Mark Brinker, Houston Orthopedic Surgeon Article RSS feed. . Dr. Mark Brinker, Houston Orthopedic Surgeon http://drbrinker.com/tresources/en/images/icons/tendenci34x15.gif http://drbrinker.com no Copyright 2005, Dr. Mark Brinker, Houston Orthopedic Surgeon Tendenci Membership Management Software by Schipul - The Web Marketing Company en-us noemail@drbrinker.com Tue, 07 Apr 2015 22:30:10 GMT Articles http://drbrinker.com/en/art/95/ <br> <h2>Hughston Health Alert, Vol. 1, No. 1, 1989</h2> <h3>Author: M.R. Brinker</h3> <p>Click here to read the entire <a target="_blank" href="/attachments/articles/95/Hughston Health Alert.pdf">published article by Dr Brinker</a></p> <br> <hr /> <div>The great majority of snow skiing injuries involve the leg. Fractures of the bones of the lower leg (the tibia and fibula), as well as injuries to the knee ligaments, are common. This is not surprising when we consider that the sport entails sliding down a slick, inclined surface at speeds that can exceed 150 kilometers per hour. Constantly changing direction with a pair of lever arms (skis) attached to the feet can create tremendous torsional forces that the legs are not designed to accommodate. The foot is a relatively short lever compared to a ski and so does not transmit the large torsional forces to the leg that skis do.The attachment of the foot to the ski via boot and binding limits foot rotation and effectively attaches longer levers directly to Ihe legs. A twisting force at the tip of a ski is multiplied by the long lever arm and can result in tibia and/or fibula fracture. Deceleration fractures at theboot top, or "boot top fractures," may occur as a result of bending loads on the tibia when the forward motion of the skier comes to an abrupt halt. In an effort to reduce skiing injuries, technology is seeking to improve equipment. Of major importance in preventing ski accidents is the design of release bindings and ski boots.</div> <div>&nbsp;</div> <div> <h3><strong>Bindings</strong></h3> Release bindings are designed to release the boot from the ski when the load at the ski boot junction exceeds a certain level. During normal skiing maneuvers, the boot must remain attached to the ski without inhibiting performance, If the binding releases at the proper time, the<br> likelihood of a leg injury is greatly reduced. If, however, the binding fails to release, the foot is locked to the ski as if no safety device had been incorporated. The ideal ski binding<br> would therefore be one that would consistently release before the load on the leg becomes great enough to produce a fracture or other injury. Proper calibration of the binding release is the key to this consistency. Spiral fractures of the tibia are among the most serious ski injuries of<br> the lower leg. These are produced by torsional forces acting on the tibia as the leg is twisted on the fool. Torsional loads delivered to the lower leg are resisted by both muscle and<br> bone. As the muscles of the lower leg tense, they resist a portion of the torsional forces and decrease the deforming force "seen" by the bone. For safety's sake, however, when calibrating binding releases, one must assume that the bone "sees" all the torsional toree because skiers are generally, and erroneously, advised to...<br> </div> <br><br>2-Jan-88 3:00 PM Hughston Health Alert Hughston Health Alert, Vol. 1, No. 1, 1989 Author: M.R. Brinker Click here to read the entire published article by Dr Brinker The great majority of snow skiing injuries involve the leg. Fractures of the bones of the lower leg (the tibia and fibula), as well as injuries to the knee ligaments, are common. This is not surprising when we consider that the sport entails sliding down a slick, inclined surface at speeds that can exceed 150 kilometers per hour. Constantly changing direction with a pair of lever arms (skis) attached to the feet can create tremendous torsional forces that the legs are not designed to accommodate. The foot is a relatively short lever compared to a ski and so does not transmit the large torsional forces to the leg that skis do.The attachment of the foot to the ski via boot and binding limits foot rotation and effectively attaches longer levers directly to Ihe legs. A twisting force at the tip of a ski is multiplied by the long lever arm and can result in tibia and/or fibula fracture. Deceleration fractures at theboot top, or "boot top fractures," may occur as a result of bending loads on the tibia when the forward motion of the skier comes to an abrupt halt. In an effort to reduce skiing injuries, technology is seeking to improve equipment. Of major importance in preventing ski accidents is the design of release bindings and ski boots. Bindings Release bindings are designed to release the boot from the ski when the load at the ski boot junction exceeds a certain level. During normal skiing maneuvers, the boot must remain attached to the ski without inhibiting performance, If the binding releases at the proper time, the likelihood of a leg injury is greatly reduced. If, however, the binding fails to release, the foot is locked to the ski as if no safety device had been incorporated. The ideal ski binding would therefore be one that would consistently release before the load on the leg becomes great enough to produce a fracture or other injury. Proper calibration of the binding release is the key to this consistency. Spiral fractures of the tibia are among the most serious ski injuries of the lower leg. These are produced by torsional forces acting on the tibia as the leg is twisted on the fool. Torsional loads delivered to the lower leg are resisted by both muscle and bone. As the muscles of the lower leg tense, they resist a portion of the torsional forces and decrease the deforming force "seen" by the bone. For safety's sake, however, when calibrating binding releases, one must assume that the bone "sees" all the torsional toree because skiers are generally, and erroneously, advised to... no http://drbrinker.com/en/art/95/ Sat, 02 Jan 1988 21:00:00 GMT